Network Card User Manual

8400-A2-GZ40-10 October 2003 5

DS3 Uplink

SCP cards with a DS3 uplink have two BNC jacks: one for the transmit direction

and one for the receive direction. To cable an SCP card with an DS3 uplink:

1. Connect the input cable to the RX jack on the faceplate of the SCP card.

2. Connect the output cable to the TX jack on the faceplate of the SCP card.

3. If the chassis is mounted in a rack, direct the cables toward the nearest rail

and fasten them with cable ties.

03-17463

SCP-DS3

8411

SYSTEM

Active

Standby

Alarm

ETHERNET

Test

LK 1

UPLINK