Network Card User Manual

6 October 2003 8400-A2-GZ40-10
OC3 Uplink
SCP cards with an OC3 uplink use an SFP transceiver that accepts an LC-type
connector. To cable an SCP card with an OC3 uplink:
1. Remove the plastic dustcover from the SFP socket.
2. Insert the LC connector of your fiber optic cable into the SFP socket.
3. Observing the minimum bend radius for your cable, fasten it with cable ties in
such a way that it will not be kinked or snagged in the course of other cabling.
If you do not know the specifications for your cable, maintain a radius of at
least ten times the cable diameter.
SC
P-O
C
3
8412
SYSTEM
Active
Standby
Alarm
TX
RX
ETHERNET
Test
LK 1
UPLINK
03-17419