Network Device Installation Guide

Custom Network Interface Settings
5-3
Issue 2 December 1996
Table 5-1. Custom Window Fields (2 of 2)
Field Description
IP Internet Protocol address (home address) for the
workstation.
Domain Not required.
Configuring LAN Hardware
Parameters
Use Hardware... to select and configure the following
hardware-related parameters for Ethernet, Token Ring, or FDDI
networks:
G Vendor
G Board Type
. Procedure
1. Choose Settings... from the Network menu. The
Custom window appears, as shown in Figure 5-1.
2. Choose Setup from the Custom window menu bar.
3. Choose Hardware... from the Setup menu. The
Hardware dialog box appears, as shown in Figure 5-2.