Network Device Installation Guide

Custom Network Interface Settings
5-10 Issue 2 December 1996
NOTE:
If your modem requires special settings, refer to Table 5-4
and the manual provided by your modem vendor.
5. Choose OK.
Table 5-4. Modem Settings Dialog Box Fields
Field
Description
Dial Dial commands (prefix and suffix).
Hangup Hangup commands (prefix and suffix).
Binary TX Binary transmission commands (prefix and suffix).
Binary RX Binary receive commands (prefix and suffix).
Answer Answer on number of rings.
Originate Set originate state.
Initialize Set initial state.
Exit Exit AT command set.
Modem Defaults Set all fields to selected default (none, Hayes
compatible, Telebit, or MultiTech).