Network Device Installation Guide

Custom Network Interface Settings
5-12 Issue 2 December 1996
Table 5-5. Dial Settings Dialog Box Fields
Field Description
Dial Telephone number to use when
dialing.
Timeout If Not Connected In Number of seconds to wait for
connection before timing out.
Redial After Timing Out Redial after a timeout occurs.
Redial After Carrier Is Lost Redial after the carrier is lost.
Signal When Connected Signal when connected.
Open Log When Connecting Open a log when connecting.
Designating the Default
Gateway
Use Default Gateway... to specify which gateway (router)
should receive communication destined for addresses in an
unknown subnet. Refer to the
NEWT TCP/IP for Windows
Installation and User’s Guide.