user manual

2
November 2000 8021-A2-GZ40-20
Product Documentation Online
Complete documentation for this product is available at
www.paradyne.com
.
Select
Library
→
Technical Manuals
→
Hotwire DSL & MVL Systems.
Select the following documents:
8000-A2-GB22
Hotwire Management Communications Controller (MCC) Card,
IP Conservative, User’s Guide
8000-A2-GB26
Hotwire MVL, ReachDSL/MVL, RADSL, IDSL, and SDSL Cards, Models
8310, 8312/8314, 8510/8373/8374, 8303/8304, 8353/8354, and 8343/8344,
User’s Guide
8021-A2-GB20
Hotwire Shelf Concentration Module (SCM) Card User’s Guide
Contact your sales or service representative to order a paper copy of a Paradyne
document:
Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)
Outside the U.S.A., call 1-727-530-8623
SCM Card Installation Planning
The Hotwire GranDSLAM chassis is shipped with one of the following
installation documents, depending on model type:
Refer to the installation guide to:
— Install and set up the Hotwire GranDSLAM chassis
— Install the SCM card
— Connect cables
After the SCM card is installed, there are configuration procedures that must
be performed before you can begin to use the DSL port cards for Internet or
intranet connectivity. Refer to the
Hotwire MVL, ReachDSL/MVL, RADSL,
IDSL, and SDSL Cards User’s Guide
and the
Hotwire Shelf Concentration
Module (SCM) Card User’s Guide
for detailed configuration procedures.
Access these documents using the instructions in
Product Documentation
Online
.
Document Number Document Title
8620-A2-GN20
Hotwire 8620 GranDSLAM Installation Guide
8820-A2-GN20
Hotwire 8820 GranDSLAM Installation Guide