Computer Hardware User Manual

3. Remove your computer cover.

4. Remove the slot bracket from an available PCI slot.

5. To install the card, carefully align the card's bus

connector with the selected PCI slot on the

motherboard. Push the board down firmly, but

gently, until it is well seated.

6. Replace the slot bracket holding screw to secure the

card.

7. Replace the computer cover and reconnect the power

cord.

Driver Installation

This section provides information on how to install the

Parallel PCI 1P drivers.

Windows 7 (32-/64-bit)

1. Install the board and boot up Windows.

Note: Windows 7 will automatically search

preconfigured driver folders for the proper driver,

this process may take several minutes to complete.

Do not interrupt this process.

2. Right click Computer, click Manage, click Device

Manager.

3. Insert the driver CD. Right click PCI Parallel Port,

click Update Driver Software.

4. Click Browse my computer for driver software.

5. Type D:, then click Next. (Change D: to match your

CD/DVD-ROM drive letter)

6. At Windows has successfully updated your driver

software, click Close to complete the installation.