Computer Hardware User Manual

To Verify Windows 7 / Vista / XP / Server 2003 &

2008 Installation

1. Check in Device Manager to verify installation.

For Windows 7: Right click Computer, click Manage,

then click Device Manager.

For Windows Vista: Right click Computer, click

Manage, click Continue, then click Device Manager.

For Windows XP / Server 2003: Right click My

Computer, click Manage, click Device Manager.

For Windows Server 2008: Right click Computer, click

Manage, double click Diagnostics, then click Device

Manager.

2. Click on the + (plus sign) in front of Ports (COM &

LPT), and a SIIG CyberPro Parallel port should be

displayed.

Windows 2000

1. Install the board and boot up Windows.

2. At the Found New Hardware Wizard, click Next.

3. Select Search for a suitable driver for my device

(recommended), then click Next.

4. Select Specify a location, uncheck the other options

and click Next.

5. Insert the driver CD, type in D:\2000, then click OK.

(Change D: to match your CD/DVD-ROM drive

letter)

6. Check Install one of the other drivers, click Next.

7. Select SIIG CyberPro 1P PCI board(Windows 2000),

click Next.

8. Click Finish.

9. Restart Windows to complete the installation.