Computer Hardware User Manual

To Verify Windows 2000 Installation

1. Right click My Computer, click Manage, then click

Device Manager.

2. Click on the + (plus sign) in front of Ports (COM &

LPT), and a SIIG CyberPro 1P PCI board should be

displayed.

Windows ME

1. At the Add New Hardware Wizard, select Specify

the location of the driver (Advanced), click Next.

2. Check Specify a location, uncheck the other box,

insert the driver CD, type in D:\Me, then click Next.

(Change D: to match your CD/DVD-ROM drive

letter)

3. Click Next, then Finish.

4. Restart Windows to complete the installation.

Windows 98 / 98SE

1. At the Add New Hardware Wizard, click Next.

2. Select Search for the best driver for your device.

(Recommended), then click Next.

3. Select Specify a location, uncheck the other boxes,

insert the driver CD, type in D:\9x, then click Next.

(Change D: to match your CD/DVD-ROM drive

letter)

4. Click Next, then Finish. If prompted, at the Insert

Disk box click OK. Insert your Windows 98

Installation CD-ROM then click OK.

5. Restart Windows to complete the installation.