T-60 Gas Mask Instruction Manual Standard: ASTM E2952-17 Please read and understand the content of instructions before using
T60 Gas Mask The T60 Mask uses high quality medical grade silicon rubber compositions made with non-toxic, tasteless, and odorless materials. The mask is made to universally fit any size face to ensure a perfect airtight seal in any environment. In addition to its universal fit, the T60 is designed for optimum comfort by using individual straps to evenly distribute pressure around your face.
Mask Donning Procedure 1. Extend straps and pull over the head to cover the mouth/nose with the mask. 2. In order to properly tighten mask begin with pulling the two bottom neck straps tight until the mask feels secure around your neck. 3. Once the two neck straps are secure, begin to tighten the top head strap until mask is fully resting on your face. Give the mask a gentle shake to ensure a good seal against your face.
P-A-1 Filter Installation Instructions 1. Locate the sealant ring on the gas mask interface. Thoroughly inspect the ring to ensure the ring will seal properly. 2. Select the correct filter in accordance to the requirements and chemicals of the work being performed. 3. Remove plastic film from the filter canister. 4. Screw the filter onto the mask nozzle in a clockwise direction. Bayonet Filter Installation Instructions (3M Filters) 5.