Indexer User Guide

OEM650/OEM650X • OVERVIEW

Installation Preparation

Before you install this product, complete the following steps:

1. Review this user guide. Become familiar with the user guide’s

contents so that you can quickly find the information you need.

2. Develop a basic understanding of all system components, their

functions, and interrelationships.

3. Complete the basic system configuration and wiring instructions

(in a simulated environment, not a permanent installation) pro-

vided in Chapter 2, Installation.

4. Perform as many basic functions as you can with the preliminary

configuration. Try to simulate the task(s) that you expect to

perform when you permanently install your application (however,

do not attach a load at this time). This will give you a realistic

preview of what to expect from the complete configuration.

5. After you have tested the system’s functions and become familiar

with the system’s basic features, carefully read Chapter 2.

6. After you have read Chapter 2 and clearly understand what must

be done to properly install the system, begin the installation

process. Do not deviate from the instructions provided.

7. Before you customize your system, check all of the system func-

tions and features to ensure that you have completed the installa-

tion process correctly.

The successful completion of these steps will prevent subsequent

performance problems and allow you to isolate and resolve potential

system difficulties before they affect your system’s operation.

Software Reference Manual

A separate Software Reference Manual contains descriptions for all

software commands applicable to the OEM650X and OEM350X.

Warnings & Cautions

Warning and caution notes alert you to problems that may occur if

you do not follow the instructions correctly. Situations that may

cause bodily injury are presented as warnings. Situations that may

cause system damage are presented as cautions.

WARNING

Do not touch the motor immediately after it has been in use for an extended period of

time. The motor may be hot.