Installation Guide

©2018 The Agency ACBH. PO Box 178, West Grove, PA 19390
www.partsmasterpro.com
1-877-542-2211
[e-mail]
53019
WARNING: Cancer and Reproductive Harm - www.P65warnings.ca.gov
53019
1. Unthread spray head from spray hose and retain all parts.
2. Remove retainer clip and slide old spray head nut from hose.
3. Push hose through spray hose guide so guide can
be removed.
4. Unthread hose guide nut with adjustable wrench if
necessary.
5. Remove old spray hose guide and install the new hose
guide.
6. Place new nut on spray hose and secure with new
retainer clip.
7. Place new washers on hose and thread nut onto new
spray head.
Installation Instructions