Installation Guide

©2018 The Agency ACBH. PO Box 178, West Grove, PA 19390
www.partsmasterpro.com
1-877-542-2211
[e-mail]
58517B
1. Using adjustable wrench, remove existing shower head.
2. Remove debris from threads of shower arm and shower
head using a soft cloth.
3. Wrap outside threads of Shower Flow Adjuster with thread sealing tape.
4. Carefully thread Shower Flow Adjuster into shower head.
Tighten using adjustable wrench.
5. Wrap outside threads of shower arm with thread sealing tape.
6. Carefully thread Shower Flow Adjuster/shower head onto.
shower arm. Tighten using adjustable wrench.
7. Turn on shower to test for leaks.
Thread Sealing Tape
Showerhead Flow Adjuster reduces ow to a small trickle of
water. To shut off water completely, turn faucet handle to the off position.
Shower Arm
Thread
Sealing Tape
Shower Head
Shower Flow
Adjuster
WARNING: Cancer and Reproductive Harm - www.P65warnings.ca.gov
Installation Instructions