ASSEMBLY INSTRUCTIONS Part # Reference Image QTY STEP 1 1 A B B 4 C 1 D 1 E 16 M6*20 F A E E Place table board (A) on the ground, then screw table legs (B) to it. Please do not tight any screws to the end at this step. STEP 2 E E C 1 Screw table leg support ring (C) to table legs. Make sure all screws are connect properly and tighten all screws to the end. STEP 3 D Place umbrella hole lid (D) properly. ASSEMBLY TIPS: Please use the hardware and accessories included in the set.