Use and Care Manual

ITEM 61469, COCONINO WICKER CHAIR

ASSEMBLY

Step 1: Place all parts on a clean, soft, level surface.

Step 2: Attach the Back to the Seat with 3 - pcs. 1/4" x 1 1/2" Hexagon Screws,

3 - pcs. 1/4" Lock Washers, and 3 - pcs. 1/4" Washers.

Step 3: Attach the Arms to the Back with 2 - pcs. 1/4" x 1" Hexagon Screws and

2 - pcs. 5/16" Washers.

Step 4: Attach the Arms to the Seat with 4 - pcs. 1/4" x 5/8" Hexagon Screws,

4 - pcs. 1/4" Lock Washers and 4 - pcs. 1/4" Washers.

Tighten all hardware. Your chair is now ready for use!