Full Product Manual

LIGHTING SYSTEM

With the umbrella secured in a base, you can

now use the LED lighting system. There are two

brightness settings that can be toggled easily.

First, lift the protective cover of the power inlet

located on the lower tube.

Plug the power cord into the umbrella base,

making sure it is inserted fully. Then connect the

other end of the power adapter to an outlet. You may

also need to connect the cord from the wall to the

power converter unit.

After opening the umbrella, you can use the

lights located on the inside. Gently touch the

surface of the crank casing to turn the lights on

or off. To change the brightness, simply touch the

same location.

There is also a USB outlet located below the touch

control. This can be used to charge or power

mobile devices.

NOTE: The umbrella must be connected to a power

source for the USB outlet to work.

When not using your lighted umbrella, always turn

the lights off and unplug the power cord and adapter.

Store the power adapter in a safe, dry place until

next use.