Full Product Manual

Contact us for assistance: [phone] | www.wtliving.com 2
INFORMATION
BEFORE YOU BEGIN
Before beginning assembly, make sure all parts are present. Compare parts received with the “Parts List.” If any part
is missing or damaged, do NOT attempt to assemble the product. Please read and understand this entire manual
before attempting to assemble, operate or install this product. If you have any questions regarding the product,
please call us toll-free at [phone], email us at [e-mail], or go online and live chat at
www.wtliving.com. Our hours are: 9 a.m. – 6 p.m., EST, Monday – Friday
GENERAL INFORMATION
Your new bench is made from the nest materials available. It should provide many years of enjoyment with
minimal care.
Keep your bench clean and apply a coat of wax a few times a year. For best results, clean the bench with warm
soapy water and use an outdoor furniture wax. If you use furniture covers, always make sure the bench is clean
and completely dry before covering as mold may form in dark, wet places. Check the bolts on your bench regularly
to make sure they are tight.
To provide a rust free product this bench is made of Cast Aluminum which is a relatively soft material. Be careful
not to over tighten your hardware. Stripped hardware is not covered under the manufacturer’s warranty. The
weight limit for this bench is 225 lbs.
SAFETY INFORMATION
WARNING
DO NOT stand or allow children to stand on the assembled product. DO NOT tighten bolts completely until instructed
to do so. Afer nal alignment, make sure all nuts and bolts are securely fastened. NEVER use a power tool to assemble
or tighten your furniture. Perform periodic checks to make sure the hardware is secure and tig ten if needed.
CAUTION
READ all instruction before beginning assembly. Failure to do so may result in faulty assembly and potential injury.
Assemble the item on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging the item.