Data Sheet

LA6-W18D-16_26
• “Time-trigger” mode Operation Example
The following are examples of the “Time-trigger” mode operation. In addition to time progress and pattern changes, the gure
also shows the “Mute” input operation.
* The “Time-trigger” mode operating state is an example for setting data.
In addition to time progress and pattern changes, the gure also shows the STOP input operation, the mute input, and the clear
input. A “STOP” input setup shows an indication of the pattern at a “STOP” input by ashing.
* The “Time-trigger” mode operating state is an example for setting data.
5.2.2. “Pulse-trigger” mode
The “Pulse-trigger” mode is operated like the “Time-trigger” mode for a group. However, with the pattern transition timing, it is
only used as a one shot pulse for input 5.
The memory for a maximum of 15 groups can be used, and the combination of ON/OFF to inputs 1-4 performs a call. This setup
can be made in the “EDITOR for LA series” software application (Visit our homepage at http://www.patlite.com/ to download the
software application and other features for the LA6.).
• Setup Parameters
This mode has parameters that can be set up as shown in the following table.
Setup Range Setting Index Description
Every Pattern
LED Lighting/Flashing Select all LEDs to turn on or ash. Flashing rates are selectable from 30
times per minute, 60 times per minute, or 120 times per minute.
Alarm Tone Alarm Silence or one tone can be selected from 11 varieties.
Every Tier LED Color LED lights On or O can be selected.
Operating
Condition
LED OFF
1/1 1/2 1/3
1/4 1/5
... 1/60 1/61 1/62
1/63
OFF
Buzzer
Mute Mute Mute
Signal Input
Input 1
Input 2
Input 3
Input 4
Input 5 (STOP)
Input 6 (Mute)
Input 7 (Clear)
Operating
Condition
LED OFF
1/1
1/2
STOP
Clear
1/1
1/2 5/1 5/2 5/3 (STOP) Clear 1/1 1/2
OFF
Buzzer
Mute Mute Mute
Signal Input
Input 1
Input 2
Input 3
Input 4
Input 5 (STOP)
Input 6 (Mute)
Input 7 (Clear)