Data Sheet
LA6-W18D-22_26
To change the LED color to a dierent preference, by pushing the Multiple-function for about 3 seconds, the expected color
status that is on (such as the 1st LED tier color) can change to the next LED tier color (such as the 2nd LED tier color) by selecting
the desired lighted state. Once the last LED tier color is changed and the Multiple-function Button is pushed about another 3
seconds, all LED color changes are complete.
5.3.2.2. Version Conrmation
To verify the rmware version, three LED tiers will ash in accordance to the current rmware version, indicated from top to
bottom. The following table indicates the meaning for each ashing LED color and the corresponding number.
LED Color Corresponding Number
OFF 0
RED 1
AMBER 2
GREEN 3
BLUE 4
WHITE 5
PURPLE 6
PINK 7
SKY-BLUE 8
LEMON 9
The version is expressed in the order from the LED top to bottom, as shown in the gure below.
Push Button
About 3 sec.
Push Button
About 0.5 sec.
Push Button
About 0.5 sec.
The color is
entered and
the next tier is
selected
Push Button
About 0.5 sec.
Repeat for all tiers
The procedure
is completed
when the last
tier is set
Ver. .