Installation Instructions

ManualsBrandsPatriot Lighting Elegant Home ManualsChandeliersPatriot Lighting® Elegant Home Corinth 4-Light Dark Forum Patina with Gold Accent Island Light

Bulb Type B Max.100W

(Not Included)

Glass Shade

Glass Holder

Fixture

Socket Ring

Finial Assembly

Cover

Finial

1. Thread two screws to the mounting strap, and

secure them with two lock nuts. Adjust the

length of the screws if necessary.

2. Attach the mounting strap to outlet box by using

two mounting screws.

3. Adjust the arms of the fixture according to the

drawing of the package.

Important:

a. The arms should be positioned with equal

distances between them.

b. The arms should be fixed securely.

4. Rod connections:

a. Thread the fixture wire from the fixture through

the lower rod, and then secure the lower rod

onto fixture using the threaded pipe.

b. Thread the fixture wire through the middle rod,

and then secure the middle rod onto the lower

rod using the threaded pipe.

c. Thread the fixture wire through the upper rod,

and then secure the upper rod onto the middle

rod using the threaded pipe.

The height can be adjustable to 29"~71" by

using the rods.

5. Thread the fixture wire through the canopy kit,

then secure the rod assembly to the set nipple

of the canopy kit.

6. Pull out the outlet wires and the house grounding

wire from the outlet box. Make wire connections

using the wire nuts:

---The black (hot) wire from fixture to the black

(hot) wire from power source.

---The white (neutral) wire from fixture to the

white (neutral) wire from power source.

---Attach the fixture grounding wire to the

mounting strap with the green grounding

screw. Then connect it to the house grounding

wire with the wire nut.

Ball Nut

Canopy Kit

Upper Rod

Middle Rod

Set Nipple

Fixture Wire

Outlet Box

House Grounding Wire

Wire Nut

Screw

Mounting Strap

Green Grounding Screw

Lock Nut

Mounting Screw

Lower Rod

Threaded Pipe

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

Customer Service: 1-800-887-6326 (weekdays 9 a.m. – 5 p.m. CST)

3. READ AND SAVE THESE INSTRUCTIONS.

352-5970

130418

Hardware Package:

(1 SET)

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS 352-5970 WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. Customer Service: 1-800-887-6326 (weekdays 9 a.m. – 5 p.m. CST) 3. READ AND SAVE THESE INSTRUCTIONS. Hardware Package: Outlet Box House Grounding Wire Wire Nut Screw Mounting Strap Lock Nut Mounting Screw (1 SET) 1.
PAGE 2
Carefully put the wires back into the outlet box. Fig. 1 7. Attach the canopy to the mounting strap by inserting the Support Brace screws, and secure it with two ball nuts. 8. Attach the glass shades to the glass holders, then secure them with the socket rings. 9. Attach the cover to the fixture, thread the finial assembly through the fixture, making sure the finial assembly feeds through its center hole, secure them with finial. 10. Install a bulb (not included).