LED Flushmount ITEM #3516919 MODEL #LED-30039 x1 C x1 D GG Bar Screw x4 Plastic Washer x4 Cap Screw x4
1. 4. Gently pour the crystal balls (D) into the glass shade (C) making sure to keep the surface area even. 1 4 D C 2. Connect the ground wire to the mounting unit (AA) by securing it with the ground screw. 2 5. Place the glass panel (B) into the glass shade (C) making sure to line up the holes with the screws. 5 B C 3. Connect the black to black (power), the white to white (neutral) and copper wire to ground wire with the wire nuts (DD) and secure with electrical tape (not included).
7. Attach the light fixture (A) to the glass shade (C) with the cap screws (GG). 8. Place the canopy of the light fixture (A) over the mounting unit (AA) and junction box and secure with the suppport screws (CC).
