Installation Instructions

ASSEMBLY INSTRUCTIONS
18. INSTALLATION WITHOUT THE LIGHT KIT 
(continued)
c. Remove the three switch housing screws from the top
edge of the switch housing cap.
e. Use the switch housing screws to attach to the switch
housing.
Note: Align the notch in the switch housing cap with the
reverse switch.
Attach the pull chain extension to the pull chain (see
Step 16).
18
19
9
Switch
Housing
Cap
Reverse
Switch
Notch
Switch
Housing
Screw
19. Turn ON the electrical power at the main fuse or
circuit breaker and the wall switch.
Assembly is complete.