Installation Instructions

ASSEMBLY INSTRUCTIONS

1. Turn OFF the electrical power at the main fuse or circuit

breaker.

2. Remove the mounting bracket by removing the two

mounting bracket screws from the round holes in the

canopy. Then loosen the other two mounting bracket

screws from the J-shaped slots. Retain the mounting

bracket screws for later.

3. Install the mounting bracket to the outlet box (not

included) using the screws and washers provided with the

outlet box.

Warning: To reduce the risk of re electric shock,

or personal injury, mount to the outlet box marked

“acceptable for fan support” and use the mounting screws

and washers provided with the outlet box.

4. Remove the ten motor screws and ve motor blocks

from the underside of the motor. Discard the motor blocks

but save the motor screws for blade arm installation.

Note: The notch in the tter plate allows a Phillips

screwdriver access to the motor screws.

Motor Screw

Motor Block

Mounting

Bracket Screw