Installation Instructions

ASSEMBLY INSTRUCTIONS

13. Install the blade arm to the underside of the motor

assembly with previously removed motor screws. Tighten

each blade arm completely before moving to the next.

Note: The notch in the tter plate allows a Phillips

screwdriver access to the motor screws.

14. . Connect the single-pin connectors from the tter

plate to the single-pin connectors from the light kit --

blue to black and white to white.

15. Remove the preassembled tter plate screws. Secure

the light kit to the tter plate using the three tter plate

screws.

16. Remove the socket ring from each socket. Raise the

glass shade over the socket of the light kit. Secure the

glass shade by twisting the socket ring clockwise. Repeat

for each socket.

Fitter Plate

Socket Ring

Glass Shade

Single Pin

Connector

Light Kit

Screw

Motor Screw

Blade Arm