Installation Instructions

Hardware Kit
Owner’s
Manual
PACKAGE CONTENTS
2
HARDWARE CONTENTS
24
25 26 27 28
29
1. Trim Ring
2. Canopy
3. Canopy Cover
4. Mounting Bracket Screw
(x4)
5. Mounting Bracket
6. Yoke Cover
7. Set Screw (x2)
8. Motor Assembly
9. Motor Screw (x10)
10. Fitter Plate
11. Fitter Plate Screw (x3)
12. Light Kit
13. Shade (x3)
14. E26 LED Bulb (x3)
15. Downrod
16. Downrod Clip
17. Downrod Pin
18. Blade (x5)
19. Blade Arm (x5)
20. Hardware Kit
21. Owner’s Manual
22. Thumbscrew (x9)
23. Adapter Plate
24. Adapter Plate Screw (x3)
25. Blade Screw (x15)
26. Blade Washer (x15)
27. Rubber Washer (x15)
28. Wire Connectors (x3)
29. Pull Chain Extension (x 2)
Unpack your fan and check the contents. You should
have the following items:
PACKAGE CONTENTS
HARDWARE CONTENTS
Note: Some extra hardware has been included. The quantity
listed above is the number required for installation.
Note: To install fan without a light kit, please
call Customer Service [phone] to order
an optional switch housing.
1
2
4
3
5
6
7
8
9
14
10
11
12
13
15
16
17
18
19
21
20
22
23
TOOL REQUIRED (not included)
Tool required for assembly: Electrical tape, Phillips Screwdriver, Pliers, Safety Glasses, Step Ladder, Wire Cutters
and Wire Strippers
Helpful Tools: AC Tester Light, Tape Measure, and Wiring Handbook