Installation Instructions

8
Pull Chain Extension
ASSEMBLY INSTRUCTIONS
14. Loosen the thumbscrews in each of the light cups.
Insert the shade and hand tighten the thumbscrews until
the shades are secure.
16. Attach the pull chain extensions to the pull chains.
Assembly is complete. Restore the power at the main fuse
or circuit breaker.
15. Install the three E26-base LED bulbs into the sockets
of the light kit.
Bulb
15
16
9-pin
Connectors
Light Kit
Fitter Plate
Screw
13
13. Remove the three tter plate screws from the tter
plate. Then, connect the 9-pin connector from the fan to
the 9-pin connector from the light kit. Secure the light kit
to the tter plate using the three tter plate screws.
Note: To install fan without a light kit, please call
Customer Service [phone] to order an optional
switch housing.
Thumb Screws
Shade
Light Cup
14