Installation Instructions

9
2
OPERATING INSTRUCTIONS
1
1. Use the fan reverse switch for seasonal performance.
Using a ceiling fan will allow you to raise your thermostat
setting in summer and lower your thermostat setting in
winter without feeling a dierence in your comfort.
In warmer weather, push the reverse switch left which
will result in downward airow creating a wind chill eect.
In cooler weather, push the reverse switch right which
will result in upward airow that can help move stagnant,
hot air o the ceiling area.
Important: Wait for the fan to stop before moving the
reverse switch. The reverse switch must be set either
completely left or right in order for the fan to function
correctly. If the reverse switch is set in the middle position,
the fan will not operate.
2. The fan pull chain is located on the side of the light kit.
It has four positions to control fan speed. One pull is HIGH,
two is MEDIUM, three is LOW and four turns the fan OFF.
The light pull chain is located in the center of the light kit.
It turns the light ON and OFF.
Reverse Switch
Fan Pull Chain
Light Pull Chain