ITEM #351-9101 5-LIGHT CHANDELIER MODEL #34883 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-554-6504, 8 a.m. - 4:30 p.m, EST, Monday - Friday.
PACKAGE CONTENTS B A C D H L I F K M O J G E N PART A B C D E F G H DESCRIPTION Canopy Mounting Bracket Threaded Nipple Hex Nut Socket Coupling Threaded Post Screw Collar Ring QTY 1 1 1 3 5 1 20 1 PART I J K L M N O 2 DESCRIPTION Screw Collar Loop Threaded Knob Chain Decorative Cap Arm Decorative Assembly Fixture Loop QTY 1 20 1 1 5 5 1
HARDWARE CONTENTS AA Wire Connector Qty: 3 BB Short Machine Screw Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
ASSEMBLY INSTRUCTIONS 1. Lower decorative cap (L) over coupling (F) and secure with fixture loop (O). 1 O Note: The arms will need to be evenly spread in order for the decorative cap to assembly properly. L Note: The electrical cable will need to get pulled through the individual parts as they are installed on this and later steps. F 2.
ASSEMBLY INSTRUCTIONS 4. Connect mounting bracket (B) to the outlet box with short machine screws (BB). 4 Outlet Box Hardware Used BB Short Machine Screw x2 B C BB 5. Thread chain (K) though screw collar ring (H) and canopy (A). Using the open chain links on chain (K), attach one end to screw collar loop (I) and the other end to fixture loop (O). Weave the fixture electrical and ground wires through every other chain link and pass through threaded nipple (C) into outlet box.
ASSEMBLY INSTRUCTIONS 5. Wire connection guide: Ground wire: • For installation in the United States: Wrap ground wire from outlet box around ground screw on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw.
ASSEMBLY INSTRUCTIONS 7. Raise decorative assembly (N) to arms (M). Pass the threaded posts (G) through the loops on arms (M) and secure with threaded knobs (J). 7 J J M Repeat for remaining decorative assemblies. M G N 7. Insert 60-watt max. candelabra-base bulb or CLF/LED equivalent (none included) into socket (E). 8 Repeat for remaining sockets.
CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. • All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher. TROUBLESHOOTING PROBLEM Fixture does not light. POSSIBLE CAUSE 1. Fixture may be wired incorrectly. 2. Worn or broken bulb.