Installation Instructions

ManualsBrandsPatriot Lighting ManualsFlush Mount LightsCriss Black Integrated LED Flush Mount Ceiling Light

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

SKU Number: 348-2128

Model Number: C7260

HARDWARE CONTENTS Note: Hardware not shown actual size.

PACKAGE CONTENTS

Page 1 of 6

200721

Mounting Strap

Short Screw

Mounting Screw

Wire Connector

LED BLUETOOTH SPEAKER

PUFF LIGHT 3CCT

Summary of content (6 pages)

PAGE 1
SKU Number: 348-2128 LED BLUETOOTH SPEAKER PUFF LIGHT 3CCT Model Number: C7260 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS A B HARDWARE CONTENTS Note: Hardware not shown actual size.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). • Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
ASSEMBLY INSTRUCTIONS (continued) 5. Attach the ceiling pan(A) to the 5 mounting strap (AA) by inserting two screw (CC) heads into the key holes and rotate the ceiling pan (A) until it is locked in place. Then secure the screws tightly. 6. Attach the plastic shade (B) to 6 the ceiling pan (A) by aligning studs and slots, then turn it clockwise until it is locked in place. A A Stud Slot CC B Turn on the power at fuse or circuit box.
PAGE 4
OPERATING THE CEILING LIGHT AND BLUETOOTH SPEAKERS (continued) Bluetooth Connection Steps: 1. Once turn on power, the Bluetooth Speakers are enabled and ready to connect. 2. Enable Bluetooth on your smart device. 3. Wait for the smart device to detect the ceiling light and then select it to pair the device to the speakers. When successfully paired, the speaker will response "Connected". 4. Play music from your device while connected to the ceiling light to enjoy sound from the Bluetooth speakers. 5.
PAGE 5
CARE AND MAINTENANCE ● To clean, turn off and wipe with a damp, non-abrasive cloth. TROUBLESHOOTING PROBLEM POSSIBLE CAUSE The power is off. Check to ensure the power supply is on. The circuit breaker is off. Check to ensure the circuit breaker is in the on position. There is a bad connection. Check to ensure proper wire connections are made. Contact a qualified electrician. There is a defective switch. Contact a qualified electrician. The smart device is out of range of the Bluetooth speakers.
PAGE 6
TROUBLESHOOTING (continued) PROBLEM There is no sound or poor sound quality from the speakers. POSSIBLE CAUSE CORRECTIVE ACTION Music setting on the smart device need to be adjusted. Turn music on from the smart device. Turn volume up from the smart device. The Bluetooth device is too far away from the ceiling light speakers. Move the device closer to the ceiling light and speakers. Interference is causing confusion with the connection. Please reset speaker first.