Installation Instructions

ManualsBrandsPatriot Lighting ManualsFlush Mount LightsKriti Satin Nickel Integrated LED Flush Mount Ceiling Light

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday – Friday 9:00 a.m. – 5:00 p.m. CST

Sku Number: 348-2126

LED FLUSH MOUNT 3CCT

Model Number: C7219

PACKAGE CONTENTS

Page 1 of 4

200624

HARDWARE CONTENTS Note: Hardware not shown actual size.

Mounting Screw

Wire Connector

Summary of content (4 pages)

PAGE 1
Sku Number: 348-2126 LED FLUSH MOUNT 3CCT Model Number: C7219 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS A C B HARDWARE CONTENTS Note: Hardware not shown actual size.
PAGE 2
SAFETY INFORMATION TION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). • Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
Adjus�ng the color Temperature of the Light Customizing the color temperature of LED light by moving toggle switch. 1-a 1-b Color Temperature A View Fig.1-b Toggle Switch B a. Move the toggle switch to 3000K, the color temperature is set at 3000K. b. Move the toggle switch to 4000K, the color temperature is set at 4000K. c. Move the toggle switch to 5000K, the color temperature is set at 5000K.
PAGE 4
CARE AND MAINTENANCE ● To clean, turn off and wipe with a damp, non-abrasive cloth. TROUBLESHOOTING 1) The light does not come on at all: a) Make sure the wall switch and circuit breaker are on. b) Make sure the wiring is correct. 2) Fuse blows or circuit trips when light is turned on. a) Check for crossed wires, ensure wiring is correct. If unable to fix any of the above issues, please consult a certified electrician.