Manualshelf

Installation Instructions

ManualsBrandsPatriot Lighting ManualsFlush Mount LightsMushroom White 2-Light Flush Mount Ceiling Light
12
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Customer Service: 1-800-887-6326 (weekdays 9 a.m. – 5 p.m. CST)
3. READ AND SAVE THESE INSTRUCTIONS.
352-5829
Patriot Lighting
TM
150422
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box.
Assembly Instructions:
Hardware Package (included):
Bulb Type A Max.60W
(not included)
Socket
Glass Shade
Outlet Box
House Grounding Wire
Wire Nut(E)
Long Screw(C)
Ceiling Pan
Set Screw (F)
Mounting Strap(A)
Green Grounding Screw(D)
Mounting Screw(B)
1. Attach the two long screws to the holes on the mounting
strap. Thread them in part way: 2 to 3 turns only.
2. Attach the mounting strap to the outlet box by using
two mounting screws.
3. Pull out the source wires from the outlet box. Make
wire connections using wire nuts as follows:
---Connect the hot wire (usually black insulation)
from the fixture to the black wire from the power
source.
---Connect the neutral wire (usually white insulation)
from the fixture to the white wire from the power source.
---Attach the fixture grounding wire (usually green insulation or bare wire) to the mounting strap with the green
grounding screw, and then connect them to the house grounding wire with the wire nut.
Carefully put the wires back into the outlet box.
4. Attach the ceiling pan to the mounting strap by inserting two long screw heads into the key holes. Rotate the ceiling
pan until it is locked into place, and then tighten the long screws to secure it. (See Fig.1)
5. Install bulbs (not included). See relamping label at socket area or packaging for maximum allowed wattage.
6. Attach the glass shade to the ceiling pan, and then secure it with three set screws.( Don’t over tighten)
Mounting Strap (A)
Mounting Screw (B)
Long Screw (C)
Green Grounding
Screw (D)
Wire Nut (E)
Set Screw (F)
Fig.1
Long Screw
Key Hole Slot
Turn on the power at fuse or circuit box.

Summary of content (2 pages)