355-0075 & 355-0076 PAGE: 1 / 9 191219
3 3 A. 15-3/4” B.7-1/2” C.9-3/4” D.6-3/4” E.
Mounting Bracket Mounting Bar Hang Motor Assembly Housing Blade Bracket Fan Light Kit Blade Glass Shade LED Light Bulb PAGE: 3 / 9 191219
PAGE: 4 / 9 191219
17.
Connect the two ground wires (Green or bare copper) using a wire connector. One ground wire will come from outlet box and one from the mounting bar. Connect the two ground wires (Green or bare copper) using a wire connector. One ground wire will come from outlet box and one from the mounting bar.
Screw & Lock Washer Mounting Bracket Decorative Housing Blade Screw Washer Blade Blade Bracket Motor Screw Remove screws and washers from motor first and then secure the blade brackets to the motor with motor screws and washers. Blade Bracket Switch Box Screw Switch Box Cover Fig.12 Fig.
Fig.14 Fig.15 Glass Holder Pull Chain Glass Shade 3-6W E26 A19 LED Bulbs (included) E26 A19 bulb Max. 40W Socket Ring Attach the glass shades onto the glass holders, secure them with socket rings. Fig.16 Install LED bulbs (included). See relamping label at socket area or packaging for maximum wattage allowed. Reverse Reverse Switch Forward Fig.16a Reverse Side Switch Forward The slide switch on switch box sets direction of fan rotation. Select the desired direction of fan rotation.
Troubleshooting Guide PAGE: 9 / 9 191219
