Installation Instructions

ManualsBrandsPatriot Lighting ManualsFlush Mount LightsDessa Chrome 3-Light Flush Mount Ceiling Light

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326

Monday - Friday 9:00 a.m. - 5:00 p.m. CST

Sku Number: 351-8019

3 LIGHT DUAL MOUNT

CEILING LIGHT

Model Number: K108

Page 1 of 4

HARDWARE CONTENTS Note: Hardware not shown actual size.

PACKAGE CONTENTS

G9 Xenon Bulb Max.40W

Glass

X14

X13

X28

Chain

Loop Lock

Loop

Canopy

Collar

Mounting Unit

Mounting Plate

Wire Connector

I I

Installation for Ceiling Light kit: Installation for Pendant kit:

Fixture Mounting Screw

Mounting Screw

Long Rod

Plastic Washer

Ball Nut

Short Rod

(For Ceiling Light)

(For Pendant)

Summary of content (4 pages)

PAGE 1
Sku Number: 351-8019 3 LIGHT DUAL MOUNT CEILING LIGHT Model Number: K108 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday - Friday 9:00 a.m. - 5:00 p.m. CST PACKAGE CONTENTS A A (For Ceiling Light) (For Pendant) HARDWARE CONTENTS Note: Hardware not shown actual size.
PAGE 2
SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). . Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge.
PAGE 3
ASSEMBLY INSTRUCTIONS ( continued ) 5. Install the long rods (MM) and the short rod (NN) 6.Fit the plastic washers (OO) at both side, fit the glass (KK) with ball nut (LL). Turn on the power at the main fuse or circuit breaker box. 5 6 ASSEMBLY INSTRUCTIONS FOR PENDANT Turn off the power at fuse or circuit box. 1. Take out the parts from the 1 hardware package for pendant. Attach the mounting unit (EE) to outlet box with mounting screws (BB). 3.Follow step 2 as for ceiling light.
PAGE 4
CARE AND MAINTENANCE To clean, turn off and wipe with a damp, non-abrasive cloth. TROUBLESHOOTING 1) The light does not come on at all: a) Make sure the wall switch and circuit breaker are on. b) Make sure the wiring is correct. 2) Fuse blows or circuit trips when light is turned on. a) Check for crossed wires, ensure wiring is correct. If unable to fix any of the above issues, please consult a certified electrician.