Installation Instructions

ASSEMBLY AND INSTALLATION
INSTRUCTIONS
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
H0237
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
190424
Turn off the power at fuse or circuit box
Installation Steps
Hardware Package (included):
Mounting Strap Unit (A) Mounting Screw (B) Wire Connector (C)
Canopy (D)
Loop Lock (F)
Chain (G)Collar (E)
1. Secure the fixture and finial onto the frame.
2. Attach mounting strap unit (A) to outlet box using two
mounting screws (B).
3. Connect the chain (G):
- Determine needed length of chain (G) to achieve
desired fixture height. (To remove excess chain
section, use pliers to bend link open.)
- Weave the fixture wires through the chain (G),
collar (E) and canopy (D).
4. Connect one end of the chain (G) to the loop
using a loop lock (F).
5. Connect the other end of the chain (G)
to the top loop using the other loop lock (F).
Outlet Box
House Ground Wire
Wire Connector (C)
Fixture Wire
Fixture Ground Wire
Mounting Strap Unit (A)
Green Ground Screw
Mounting Screw (B)
Threaded Pipe
Top Loop
Hex Nut
Washer
Canopy (D)
Collar (E)
Loop Lock (F)
Loop Lock (F)
Chain (G)
Loop
Finial
Fixture
Frame
Bulb Type B Max.60W
(not included)