LED Crystal Flushmount ITEM #3518333 MODEL #MDN-1522 CH B x 18 Mounting Unit (Pre-installed) x1 M3 Set Screw x 9 (1 spare) Allen Wrench x1
1. Remove the support screws from the light fixture (A) and take out the pre-installed mounting plate (AA). 1 AA 4. Connect the black to black (power), the white to white (neutral) and copper wire to ground wire with the wire nuts (CC) and secure with electrical tape (not included). Helpful Hint: If wires out of fixture are the same color, attach the side with markings or letters to black (positive) and the other to white (neutral). 4 5.