Installation Instructions

ManualsBrandsPatriot Lighting ManualsFlush Mount LightsNorm Chrome Integrated LED Flush Mount Ceiling Light

SKU Number: 351-8425

Norm Ceiling Light

Model Number: NRMF1515L30D1PC

HARDWARE CONTENTS Note: Hardware shown not actual size.

Gem Bar

Junction Box

Screws

Wire Nuts

PACKAGE CONTENTS

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-873-2326

Monday - Friday, 8:00 am-4:30 pm Central Standard Time

Flathead Screw

Summary of content (4 pages)

PAGE 1
SKU Number: 351-8425 Norm Ceiling Light Model Number: NRMF1515L30D1PC Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-873-2326 Monday - Friday, 8:00 am-4:30 pm Central Standard Time PACKAGE CONTENTS A HARDWARE CONTENTS AA Gem Bar x1 Note: Hardware shown not actual size.
PAGE 2
SAFETY INFORMATION Read all safety precautions and installation instructions carefully before installing or servicing this fixture. Failure to comply with these instructions could result in potentially fatal electric shock and/or property damage. It is recommended that a qualified electrician perform all wiring. This fixture must be wired in accordance with all national and local electrical codes.
PAGE 3
ASSEMBLY INSTRUCTIONS 1. Separate the gem bar (AA) from the fixture canopy (A) by removing two canopy screws (DD). 1 DD AA A 2. Mount gem bar (AA) to the junction box (not included) using two junction box screws (BB) (provided). 2 Wiring – all wiring must take place inside junction box. Caution: Make sure power is off at fuse or circuit breaker box. Check power wires for damage or scrapes. If power supply wires are within three inches of the LED driver, use wire suitable for at least 90°C (194°F).
PAGE 4
CARE AND MAINTENANCE Use a dry or slightly damp clean cloth to wipe the surface of the fixture. Do not use any cleaner with chemical solutions and abrasive pad. If necessary, use a mild soap with water to clean off any dirt or stains. TROUBLESHOOTING 1. The light does not come on at all: a) Make sure the wall switch and circuit breaker are turned on b) Make sure all wiring connections are connected and secured. 2.