- Patton VoIP Gateway Router Quick Start Guide

SmartNode 4520 and 4110 Quick Start Guide 5
Option 3: Connect the SmartNode console port to your PC
(SN4520 & SN4110). If your PC has an RS-232 serial COM port, you may use
it to connect the SmartNode Console port. Refer to the SmartNode 4110/4520
Getting Started Guide located on the CD-ROM shipped with your SmartNode for
the procedure.
3.0 Start the SmartNode Discovery Tool
1. Insert the CD included with your SmartNode into the CD drive on your PC.
2. Copy the file named SNDiscovery.exe from the CD to your PC.
3. At your PC, double-click the SNDiscovery.exe file name to activate the tool.
The SmartNode Discovery Tool window will display the IP Address, MAC
Address, Device Type (model number) and Build (software release) of your
SmartNode.
If your SmartNode does not appear:
• Make sure the SmartNode and your PC are on the same routed subnet
• Make sure any firewall programs on your PC are disabled