- Patton VoIP Gateway Router Quick Start Guide

6 SmartNode 4520 and 4110 Quick Start Guide

4.0 Access the Command Line Interface

1. In the Discovery Tool window, select the IP address of your SmartNode.

2. Right-click the selected line, and select

Telnet

3. In the telnet window, enter the username

administrator

. At the password

prompt simply press the

enter

key. The SmartNode will respond by display-

ing its IP address as the command line prompt.

4. After you log in your SmartNode will be running in operator execution

mode (indicated by > character in the command line prompt). To enter con-

ﬁguration mode, use the commands enable and conﬁgure.

10.10.22.50>

enable

10.10.22.50#

configure

10.10.22.50(cfg)#

You may now start to conﬁgure the SmartNode from scratch using the CLI com-

mands, but we recommend that you start your conﬁguration from a template. See

section 5.0 “Download a conﬁguration example, adapt it to your network, and

load it onto the SmartNode” on page 7 for further details.

For a detailed description of the CLI refer to the

SmartWare Software Conﬁgura-

tion Guide

(SCG) available on the CD-ROM and online at