User Manual

41518 pg 2

1206 Rev. 3

Remove #30 Torx Bolt and re-

install with D-Ring Web Strap

Tools Needed

#30 Torx Driver

Safety Glasses

Parts List

Sun Cap Qty - 1

D-Ring Web Strap Qty - 2

Step One

INSTALL D-RING WEB STRAPS

Locate the D-Ring Web Straps in the parts kit. Use

the #30 Torx to remove the bolt at the rear of the

speaker pod on each side of the vehicle. Thread

a bolt through the hole in each D-Ring Web Strap

and reinstall the bolts in the holes in the speaker

pods. Do not tighten them at this time.

Step Two

INSTALL SUN CAP IN WINDSHIELD RETAINER

Orient the Sun Cap on the vehicle and drape it over the

bows. Insert the plastic strip sewn along the front of the

Sun Cap into the windshield retainer. Do not catch the

fabric in the retainer. Center the Sun Cap on the vehicle so

that it is an equal distance from the top of the windshield

ﬂ ange on both sides.

For best possible installation, check to make sure that

the Sun Cap top is perfectly centered on the vehicle.

Plastic

Strip

Windshield

Driver's Side

Fabric

Make sure that only Plas-

tic Strip is in retainer

View from front

Make sure space between top fabric and

windshield ﬂ ange is equal on both sides

Windshield

Retainer