Unit installation

PAGE 1
Ins-40077-US TOUCHLOCK K and KP series - UL
Mounting
K75 Screw connector option
NOTE: The unit should be mounted
in conjunction with an electrical
backbox to achieve the required
clearance for the connector.
If an adaptor plate (310-750-US)
is tted, the mountings on the
backbox can also be used.
This keypad is designed to provide a Clock and Data output for Paxton (Net2 / Switch2).
Technical help is available: Monday - Friday from 02:00 AM - 8:00 PM (EST)
1.800.672.7298 [e-mail]
This unit is for Indoor use only
NOTE: Illustrations in this instruction show the standard keypad.
The Stainless Steel version installs and operates in exactly the same manner.
The KP series readers will also read Paxton tokens (Hitag2) and EM4100 tokens.
Documentation on all Paxton products can be found on our web site - http://www.paxton-access.com/
Readers mounted together
Mounted on metal surface
Suitability
Security sensitive doors
Wet environments
K KP
between readers
12 inches
Paxton
01/29/2010
Technical Support