User`s guide

10
Motherboard User’s Guide
Installing Memory Modules
This motherboard accommodates two 184-pin 2.5V DIMM
sockets (Dual Inline Memory Module) for unbuffered DDR266/
200 memory modules (Double Data Rate SDRAM), and maxi-
mum 2.0GB installed memory.
DDR SDRAM is a type of SDRAM that supports data transfers
on both edges of each clock cycle (the rising and falling edges),
effectively doubling the memory chip’s data throughput. DDR
DIMMs can synchronously work with 200 MHz or 266 MHz
memory bus, providing 1.6 GB/s or 2.1 GB/s data transfer rate.
Memory Module Installation Procedure
These modules can be installed with up to 2 GB system memory.
Refer to the following to install the memory module.
1. Push down the latches on both sides of the DIMM
socket.
DIMM1
DIMM2