User`s guide

Motherboard User’s Guide

The motherboard ships with an IDE cable that can support one or

two IDE devices. If you connect two devices to a single cable,

you must configure one of the drives as Master and one of the

drives as Slave. The documentation of the IDE device will tell you

how to configure the device as a Master or Slave device. The

Master device connects to the end of the cable.

Install the device(s) and connect power from the system power

supply. Use the cable provided to connect the device(s) to the

Primary IDE channel connector IDE1 on the motherboard.

If you want to install more IDE devices, you can purchase a

second IDE cable and connect one or two devices to the Second-

ary IDE channel connector IDE2 on the mainboard. If you have

two devices on the cable, one must be Master and one must be

Slave.

Analog Audio Input Header

If you have installed a CD-ROM drive or DVD-ROM drive, you

can connect the drive audio cable to the onboard sound system.

CD1