User`s guide

Chapter 2: Motherboard Installation

When you first start up your system, the BIOS should automati-

cally detect your CD-ROM/DVD drive. If it doesn’t, enter the

Setup Utility and configure the CD-ROM/DVD drive that you

have installed. On the motherboard, locate the 4-pin header CD1.

Pin Signal

1 CD IN L

2 GND

3 GND

4 CD IN R

Follow the steps below to install a CNR/PCI expansion card.

1. Locate the CNR or PCI slots on the motherboard.

2. Remove the blanking plate of the slot from the system

chassis.

Expansion Slots

This motherboard has one CNR and two 32-bit PCI slots.

PCI1

PCI2

CNR1