User`s guide

Motherboard User’s Guide

Load Optimal Settings

If you select this item and press Enter a dialog box appears. If

you press Y, and then Enter, the Setup Utility loads a set of fail-

safe default values. These default values are not very demanding

and they should allow your system to function with most kinds of

hardware and memory chips.

Note: It is highly recommended that users enter this option to

load optimal values for accessing the best performance.

Load Best Performance Settings

If you select this item and press Enter a dialog box appears. If

you press Y, and then Enter, the Setup Utility loads a set of best-

performance default values. These default values are quite

demanding and your system might not function properly if you are

using slower memory chips or other low-performance compo-

nents.

Features Setup Page

This page sets up some parameters for peripheral devices con-

nected to the system.

AMIBIOS SETUP – Features Setup

OnBoard FDC Auto

OnBoard Serial PortA 3F8h/COM1

OnBoard Parallel Port 378

Parallel Port Mode ECP

Parallel Port IRQ 7

Parallel Port DMA 3

OnBoard IDE Both

OnBoard LAN Enabled

Audio Device Enabled

Modem Device Enabled

USB Controller Auto

USB Function for DOS Disabled

ThumbDrive Support For DOS Disabled

ESC:Quit :Select Item

F1:Help PU/PD/+/-:Modify

F5:Old Values (Shift)F2:Color

F6:Load BIOS Defaults

F7:Load Setup Defaults