User manual

ANSWERING CALLS
1. Press the SEND Key to answer the incoming call.
Depending on your phone’s settings, you may also answer incoming calls
by opening the phone or by pressing any key.
2. To ignore incoming calls, press the Right Soft Key [Ignore].
With Auto w/ Handsfree, a call is automatically answered after a preset
number of ring tones. For more details, see page 69.
ENDING A CALL
1. Press the END Key.
MISSED CALL NOTIFICATION
When an incoming call is not answered, the Missed Call icon appears on the
display.
DISPLAY THE MISSED CALL FROM THE NOTIFICATION
1. Select View Now and press the OK Key.
2. To dial the phone number, press the SEND Key.
DISPLAY A MISSED CALL FROM IDLE MODE
1. Press the OK Key [MENU], select Recent Calls and press the OK Key.
2. Select Missed and press the OK Key.
3. Select the missed call and press the OK Key [OPEN].
4. To dial the phone number, press the SEND Key.
WAIT/PAUSE
Pauses are used for automated systems (i.e., voice mail or calling cards). The
numbers entered after the pause will automatically be dialed after the pause.
It is useful for dialing into systems that require a code.
Wait (W)
The phone stops dialing until you press the Send Key to dial the next number.
1. Enter the phone number.
2. Press the Right Soft Key [Options].
3. Scroll to select Wait and press the OK Key.
4. Enter additional next number(s).
5. Press the SEND Key to dial.
20 Chapter 2 − Basic Operation
Basic OperationBasic Operation
2-Sec Pause (P)
The phone waits 2 seconds before sending the next digits automatically.
1. Enter the phone number.
2. Press the Right Soft Key [Options].
3. Select 2-Sec Pause and press the OK Key.
4. Enter additional number(s) (pin number or credit card number).
5. Press the SEND Key to dial.
MAKING AN INTERNATIONAL CALL
1. Press and hold the International Dial Key.
2. Enter the country code, area code and phone number.
3. Press the SEND Key.
3 WAY CALLING
You can talk to two participants at the same time. During the call, the normal
airtime rates will be applied for each of the two calls.
1. Enter the phone number and press the SEND Key.
2. When you have connected, enter the second phone number to call
and press the SEND Key.
3. When you’re connected to the second party, press the SEND Key again
to begin your 3-Way call.
If one of the participants hangs up during the call, you and the remaining
participant stay connected. If you initiated the call and are the first one to
hang up, all three calls are disconnected.
CALL WAITING
If you are on a call and you receive another incoming call, you will hear two
beeps and the caller’s phone number will appear on the display. With Call
Waiting, you may put the active call on hold while you answer the other
incoming call.
1. Press the SEND Key to answer the other call. The first call will
automatically be placed on hold. To switch back, press the SEND
Key again.
CALLING A NUMBER FROM CONTACTS
1. Press the Right Soft Key [Contacts].
2. Scroll to the contact and press the OK Key [VIEW].
3. Scroll to the phone number.
4. Press the SEND Key to place the call.
Basic Operation − Chapter 2 21
Basic OperationBasic Operation
090204_CDM8975_RAP_EN_REV02.indd 20-21090204_CDM8975_RAP_EN_REV02.indd 20-21 2009.2.9 2:8:28 PM2009.2.9 2:8:28 PM