User manual

modify the Lock Code using the new Lock code within the Security menu.
1. Press the OK Key [MENU], select Settings & Tools and press the
OK Key, scroll to Phone Settings and press the OK Key, scroll to
Security and press the OK Key.
2. Enter the four-digit lock code and press the OK Key. The default lock
code is last 4 digits of your mobile telephone number.
3. Scroll to Phone Lock Setting and press the OK Key.
4. Scroll to access the following options and press the OK Key.
Unlocked: Phone is unlocked.
On Power Up: Phone will lock when it is turned on.
LOCK PHONE NOW
1. Press the OK Key [MENU], select Settings & Tools and press the
OK Key, scroll to Phone Settings and press the OK Key, scroll to
Security and press the OK Key.
2. Enter the four-digit lock code and press the OK Key. The default lock
code is the last 4 digits of your mobile telephone number.
3. Scroll to Lock Phone Now and press the OK Key.
4. To unlock the phone in idle mode, press the Right Soft Key [Unlock]
and enter the four-digit lock code and press the OK Key.
RESTORE PHONE
To delete all User Data and restore all settings to their initial defaults:
1. Press the OK Key [MENU], select Settings & Tools and press the
OK Key, scroll to Phone Settings and press the OK Key, scroll to
Security and press the OK Key.
2. Enter the four-digit lock code and press the OK Key. The default lock
code is the last 4 digits of your mobile telephone number.
3. Scroll to Restore Phone and press the OK Key.
4. Scroll to Yes and press the OK Key.
5. Follow the on-screen prompt and press the OK Key. The phone will
turn off and then back on again automatically.
SYSTEM SELECT
You can set your phone to search or roam on another network when you are not in
your home area. Leave this setting as default unless you want to alter the system
selection as instructed by your service provider.
1. Press the OK Key [MENU], select Settings & Tools and press the OK
Key, scroll to Phone Settings and press the OK Key, scroll to System
68
Chapter 5 Menu Function
SettingsSettings
Select and press the OK Key.
2. Scroll to access one of the following options and press the OK Key.
Automatic B: Scan radio channels based on the Automatic B setting.
Automatic A: Scan radio channels based on the Automatic A setting.
Home Only: Only within your home area or home affiliated area.
CALL SETTINGS
ANSWER OPTIONS
To determine how to handle an answered call:
1. Press the OK Key [MENU], select Settings & Tools and press the OK
Key, scroll to Call Settings and press the OK Key, scroll to Answer
Options and press the OK Key.
2. Scroll to select either Flip Open, Any Key or Auto w/ Handsfree
and press the OK Key [MARK].
3. Press the Left Soft Key [Done].
Flip Open is the default setting for this device.
When the phone is closed, the Auto w/ Handsfree Mode will not
function, except when a headset is connected.
The Auto w/ Handsfree will function after about five seconds.
Auto w/ Handsfree is available only when connected to a headset or
hands-free device.
The three functions can be used at the same time.
To answer all incoming calls, press the SEND Key.
AUTO RETRY
Set the length of time the phone waits before automatically redialing a number
when the attempted call fails.
1. Press the OK Key [MENU], select Settings & Tools and press the
OK Key, scroll to Call Settings and press the OK Key, scroll to Auto
Retry and press the OK Key.
2. Scroll to select either 10 Seconds, 30 Seconds, 60 Seconds or Off
and press the OK Key.
TTY MODE
You can attach a TTY device to your phone enabling you to communicate with
parties also using a TTY device. A phone with TTY support is able to translate typed
characters to voice. Voice can also be translated into characters and then displayed
on the TTY.
1. Press the OK Key [MENU], select Settings & Tools and press the OK
Key, scroll to Call Settings and press the OK Key, scroll to TTY Mode
and press the OK Key.
Menu Function Chapter 5
69
SettingsSettings
090204_CDM8975_RAP_EN_REV02.indd 68-69090204_CDM8975_RAP_EN_REV02.indd 68-69 2009.2.9 2:8:52 PM2009.2.9 2:8:52 PM