User Manual

1. Safety Precautions
This product complies with the requirements of the following European
Community Directives: 2004/108/EC (Electromagnetic Compatibility) and
2006/95/EC (Low Voltage) as amended by 2004/22/EC (CE-Marking).
pollution degree 2.
To ensure safe operation of the equipment and eliminate the danger of serious
injury due to short-circuits (arcing), the following safety precautions must be
observed.
Damages resulting from failure to observe these safety precautions are exempt
from any legal claims whatever.
* Do not use this instrument for high-energy industrial installation
measurement.
* Do not exceed the maximum permissible input ratings (danger of serious
injury and/or destruction of the equipment).
* Check test leads and probes for faulty insulation or bare wires before
connection to the equipment.
* To avoid electric shock, do not operate this product in wet or damp
conditions.
* Comply with the warning labels and other info on the equipment.
* Do not subject the equipment to direct sunlight or extreme temperatures,
humidity or dampness.
* Do not subject the equipment to shocks or strong vibrations.
* Do not operate the equipment near strong magnetic fields (motors,
transformers etc.).
* Keep hot soldering irons or guns away from the equipment.
* Allow the equipment to stabilize at room temperature before taking up
measurement (important for exact measurements).
* Use caution when working with voltages above 35V DC or 25V AC. These
Voltages pose shock hazard.
* Periodically wipe the cabinet with a damp cloth and mid detergent. Do not
use abrasives or solvents.
* The instrument is suitable for indoor use only
* Do not operate the meter before the cabinet has been closed and
screwed safely as terminal can carry voltage.
* Do not store the meter in a place of explosive, inflammable substances.
-9-