User Manual

102
8.3 UPGRADE
This function can be used to store and update satellite data,
Also can be used to upgrade main program of the meter.
8.3.1 Satellite information update
Connect a USB disk to the meter first, then you can enter the
UPGRADE function. The following picture will be displayed.
1) Press the <Blue(Find)> button to backup the satellite information,
satellite list, channel data and so on.
2) Press the <Red(0/22K)> button to display the firmware in the hard
drive and press OK button to upgrade the firmware .
3) Press the <Green(H/V)> button to display the channel data in the
hard drive and press OK button to upgrade the channel data.
4) Press the <Yellow(Spectrum)> button to display the all data
including the firmware and channel data.