User Manual

103
8.3.2 Main Program upgrade
After receiving the main software from supplier, put the software
(IMX format) into the USB disk and connect to the device.
Select the UPGRADE in the menu, following picture will be shown
Move the cursor to the IMX file and press OK, then the device
starting to upgrade. After upgrading, the device will be power off
automatically. You can power on the device again.
Also, there is another way to upgrade the main software.
Upgrade Software via USB port automatically.
1) Press <ON/OFF> Button ,turn off the device Then Insert USB disk .
2) Press <ON/OFF> button ,turn on the device ,The device will
automatic identification the Software.
3) The LOCK light flashed, that is software upgrading now .
4) The LOCK light constant light. Software upgrade have been
completed .
5) Press <ON/OFF> Button ,turn off the device, Pull out the USB disk.
Upgrade was completed.
8.4 CHANNEL LIST EDIT
There are two types of program.One is TV and the other is Radio.
The operation of the List and Guide at TV and Radio are the same.
Press Menu button to display main menu. Select the Edit Channel
List and press OK, If there are some programs stored in the
Device. User will see the TV list menu as below :