User Manual

111
8.7 ANGLE CALCULATION
Press OK on Angle Calculation then following window appears.
1) Satellite: Use LEFT/RIGHT button to select the satellite or Press OK
button to select the Satellite.
2) Sat longitude: Use numerical button to enter satellite position.
3) East/West:Use LEFT/RIGHT button to select satellite position is East
or West.
4) User latitude: Use numerical button to enter latitude of your
position.
5) North/South: Indicate if latitude is North or South.
6) User longitude: Use numerical button to enter longitude of your
position.
7) East/West: Indicate if longitude is East or West.
8) ANGLE CALCAULATION：Press OK button to calculate azimuth and
elevation of dish.